Remote Control Automatic Hydraulic Bollard′ S Safety Hydraulic Actuator for Parking System

Product Description

Remote Control Automatic Hydraulic Bollard's Safety Hydraulic Actuator for Parking System

Product Description

Color	Silver
Raising/lowering speed	3-6s(adjustable)
Diameter	275/220mm
raised height	600-800mm(optional)
Material	304 stainless steel
Control mode	remote control(<=50m)
system control	hydraulic and electric control
Working temperature	-30ºC~+75ºC
Embedded cylinder depth	1100mm
Lamp belt	LED lamp(Acrylic light circle)
Power Supply	220V/380V
thickness	6mm
weight	100-155kg
anti-collision levels	K6
service life	3 million times
Drainage mode	natural drainage+External drainage system

Installation steps

1. Cut the ground surface and excavate,the foundation base need around 800mm and 1130mm.

2. Fill the bottom with 20-30mm pebble and sand as water seepage stratum.

3. Embed the bollard,make sure the head of the bottom is at the same level with the horizontal ground.

4. Install the wiring tube and drainage pipe.Make sure each wire should be secured by waterproof tape
to avoid water vapor permeated into the wire.

5. Power on to test. Make sure the bollards can work well.Then cover the head of the bollard to avoid the concrete dirty it.All the drainage pipe hole need to be covered by structural adhesive.

6. Pour the concrete into the foundation base.Be careful to avoid the movement of bollard.

7. Tidy up the bollard head and ground surface, complete installation



Detail
1. Automatically raise/lower/stop.The automated bollards adopt a heavy duty hydraulic power pack and operate by integrated control.Easy to install and operate. Built-in led flashing lights and reflective tap in the bollard head to ensure visibility and safety.
2. Variable frequency controller. Adopt variable frequency controller,the raise/lower speed 3-6s is adjustable.It can stop emergently during raising/lowering process. The control signal is electric transmission, quick and reliable.
3. Firm foundation plate.Thicken seamless 304 stainless steel with strong bearing capacity more than 40 tons. Rust protection and distortion resistance.
4. Built-in valve.In case of emergent issue for example power failure, the obstacle can be lowered by relief valve manually to make sure the passage of pedestrians and vehicles in not affected.
5. Adopt high quality great power motor, the bollards can raise/lower speedy,work stable and durable with 1500 cycles working frequency per day.The motor can be disassembled for easy maintenance.
6. Multiple security protection.Use high pressure air rifle to seal up the vent,the motor can work when soaked in water with electricity leakage protector